150mm (6") twin wall
6 inch 150mm Twin Wall Insulated Flue System - Commercial & Domestic Applications
This chimney system is to be used where you have NO existing chimney - allowing you to put an appliance virtually anywhere.
This twin wall flue system is a simple push fit joint chimney system, build your system by placing each piece on top of the previous and push together to make joint (the simplest system to construct on the market today. Use both internally and externally). This system is fully insulated using 30mm condensed Rockwool between the inner and outer wall. Distance to combustibles is 60mm (therefore, make sure that you keep a distance of 60mm from the outside of the flue to any combustible material e.g. wood, plaster board).
N.B. This Twin wall flue system can be used in condensing applications. Please order and fit a seal/joint with each component.
Please note: Diameter sizes are the internal flue size.
-
Residential Flashing Size 15 Low Temp Black EPDM Size 125-225mm
Product Code : 12-15-TILE-1
Flashing suitable for 6 inch 150mm twin wall flue. Environmentally safe lead free aluminium base. The EPDM rubber upstan...£65.99
-
Flashing Size 15 High Temp Grey SILICONE Size 125-225mm
Product Code : 12-15-TILEHT.
Suitable for tiled roofs with external pipe diameters of 125mm to 225mm, the aluminum base size is 705mm x 501mm, the up...£89.99
-
£22.99
-
£87.99
-
£87.99
-
£87.99
-
£23.99
-
£85.99
-
£7.99
-
£29.99