150mm (6") twin wall
6 inch 150mm Twin Wall Insulated Flue System - Commercial & Domestic Applications
This chimney system is to be used where you have NO existing chimney - allowing you to put an appliance virtually anywhere.
This twin wall flue system is a simple push fit joint chimney system, build your system by placing each piece on top of the previous and push together to make joint (the simplest system to construct on the market today. Use both internally and externally). This system is fully insulated using 30mm condensed Rockwool between the inner and outer wall. Distance to combustibles is 60mm (therefore, make sure that you keep a distance of 60mm from the outside of the flue to any combustible material e.g. wood, plaster board).
N.B. This Twin wall flue system can be used in condensing applications. Please order and fit a seal/joint with each component.
Please note: Diameter sizes are the internal flue size.
-
£33.99
-
Stove adaptor Increaser from 130mm/ 5" outlet/vitreous to 150mm 6" twin wall flue (A17)
Product Code : 030113A17DW.
£52.99
-
DW twin wall Increaser/reducer (026) to DW twin wall- 150mm/6 inch to 180mm/7 inch
Product Code : 0601DI026DW
£102.99
-
£39.99
-
£65.99
-
£42.99
-
£78.99
-
Stove adaptor Increaser from 150mm/ 6" outlet/vitreous to 180mm 7" twin wall flue (A17)
Product Code : 030115A17DW3
Increasing/reducing adaptor used to change from 150mm/6 inch Vitreous Enamel pipe OR 150mm/6 inch Stainless Steel Single...£49.99
-
Twin wall flue to flexible liner/single wall adapter- 150mm Dia
Product Code : twinwalltoflex150
Adapter which converts from twin wall flue at the bottom to flexible liner / single wall flue at the top. 150mm 6" diame...£76.99