Connecting Pipes
Various types of connecting stove flue pipes may be used to connect straight from an appliance (e.g. Wood burning or multi fuel stove / log burner) to the chimney system - this may be a chimney liner, stack or twin wall flue system. There are three types of connecting chimney flue pipe: Vitreous enamel flue pipe (black); 1mm stainless steel single wall flue pipe 316 grade (which can be sprayed to match your stove); and Clay adapters. Flue adaptors can then be used to connect from above this stove flue pipe to either flexible flue liner or twin wall flue pipe. Please note a vertical rise of 600mm should be allowed, immediately above the appliance before any change of direction.
- Vitreous enamel stove pipe - 100mm (4")
- Vitreous enamel stove pipe - 125mm (5")
- Vitreous enamel stove pipe - 150mm (6")
- Vitreous enamel stove pipe - 180mm (7")
- Vitreous enamel stove pipe - 200mm (8")
- Stainless Steel pipe - 125mm (5")
- Stainless Steel pipe - 150mm (6")
- Stainless Steel pipe - 180mm (7")
- Stainless Steel pipe - 200mm (8")
- clay pot adaptors
-
Increaser 5in to 6in - 125mm
Product Code : 67-125-002
Standard Vitreous Enamel steel pipe only has a male end and no female end. The male end must be installed facing downwar...£36.99
-
90 Deg Elbow - 125mm
Product Code : 67-125-030
Standard Vitreous Enamel steel pipe only has a male end and no female end. The male end must be installed facing downwar...£38.99
-
90 Deg Elbow with Door - 125mm
Product Code : 67-125-040
Standard Vitreous Enamel steel pipe only has a male end and no female end. The male end must be installed facing downwar...£56.99
-
45/135 Deg Elbow - 125mm
Product Code : 67-125-031
Standard Vitreous Enamel steel pipe only has a male end and no female end. The male end must be installed facing downwar...£34.99
-
45/135 Deg Elbow with Door - 125mm
Product Code : 67-125-041
Standard Vitreous Enamel steel pipe only has a male end and no female end. The male end must be installed facing downwar...£48.99
-
5" inch 90 Deg Tee and cap
Product Code : 67-125-035
The 90° Tee is usually installed when you are connecting the flue to the rear outlet of an appliance, a tee cap is incl...£64.99
Connecting Pipes
Vitreous enamel stove flue pipe is available in matt black and gives an authentic visual look matching well with most stoves, whilst at the same time being manufactured using the latest technology to ensure years of trouble free use.
Our 1mm stainless steel, single wall flue system is manufactured in 316 grade stainless steel, 1mm thick. As well as connecting to the appliance, it can be used to reline existing masonry chimneys. Suitable for gas, oil and multi fuel appliances. It can also be painted with the appropriate high temperature paint.
Clay Adapters are used to connect the appliance to the underside of an existing chimney stack, where no flexible stainless steel chimney liner is being used. Made from 1mm thick stainless steel.