CO Alarm - Firehawk CO7B
Product Description
Details
Sealed-in Lifetime Lithium Battery
Long Life Sensor. Top quality Figaro electro-chemical sensor ensures accuracy and longevity
POSITIONING
The position of the alarm should be where it can detect CO as soon as possible to alert and protect the occupants of the premises. Make sure it can be heard by the occupants when in all parts of the premises. DO NOT place closer then 1 metre from the source appliance.
PLEASE NOTE: If either or both of these conditions cannot be met, additional alarms should be fitted throughout the premises.
USEFUL INFORMATION
REMEMBER - The overriding instruction is to ALWAYS follow the manufacturers guidance
Place the alarm in the room of potential origin of CO.
Place it high in the room (Above the tops of windows and doors) but no closer than 150mm from the ceiling.
If the alarm is in another room and NOT the room of origin it should be placed within the breathing zone of occupants in the room.
Be particularly aware of the elderly, disabled and children; and their limitations.
TEST THE ALARM BEFORE LEAVING THE PREMISES CARBON MONOXIDE IS HOT WHEN IT IS RELEASED SO IT WILL BE CARRIED UPWARDS TO THE TOP OF THE ROOM OF ORIGIN FROM WHERE IT WILL COOL AND FALL TO ALL PARTS OF THE PREMISES.
REMEMBER - The overriding instruction is to ALWAYS follow the manufacturers guidance.
Test the alarm once a week to ensure it is still operating. ONLY use the test button.
Vacuum the alarm to keep the vents clear of dust and insects.
Every six months clean the alarm with a damp cloth (do not use spray or chemical cleaners and polishes).
In the event of a problem, read the handbook and/or contact the manufacturer.
Replace the alarm at the end of its life.
Additional Information
Additional Information
| SKU | 13-CO-7B |
|---|---|
| Category | Carbon Monoxide Alarm |
