80mm (3") single wall

Twin Wall Insulated Flue System - Commercial & Domestic Applications

This chimney system is to be used where you have NO existing chimney - allowing you to put an appliance virtually anywhere.

We have been using this tried and tested Flue System Dinak DW for 10 years now and have selected it for it's ease of installation, quality manufacture and durability.  This HETAS approved Class 1 chimney system is available in 80mm-350mm on the shelf. It is available in Black and Stainless which are also interchangeable.

Suitable for multi-fuel appliances for  wood, solid fuel (coal), oil, gas, diesel, biofuel and pellet.  This flue is also perfect for biomass installations. Designed for condensing (with seal/joint) and dry applications (without joint/seal).  

This twin wall flue system is a simple push fit joint chimney system, build your system by placing each piece on top of the previous and push together to make joint (the simplest system to construct on the market today.  Use both internally and externally).  This system is fully insulated using 30mm condensed Rockwool between the inner and outer wall.  Distance to combustibles is 60mm (therefore, make sure that you keep a distance of 60mm from the outside of the flue to any combustible material e.g. wood, plaster board).  
N.B. This Twin wall flue system can be used in condensing applications.  Please order and fit a seal/joint with each component.

Please note:  Diameter sizes are the internal flue size.

Adapters

Product Code: 1C080SW6

Boiler adaptor used between a condensing appliance or stove and single wall flue
RRP: £41.00
Our Price: £18.53

Product Code: 069108100FK

Boiler adaptor used between an appliance and single wall flue
RRP: £23.53
Our Price: £12.35

Product Code: 10580SW

Adaptor used to change from 80mm (3inch) single wall to 80mm (3inch) Twin wall flue
RRP: £41.00
Our Price: £22.37

Product Code: 16Q80SW6

Adaptor used to change from 80mm (3inch) DW to 80mm (3inch) FK. Can also be used in conjunction with an MAE (20-D-MAE) to change from DW to a flexible liner.
RRP: £71.00
Our Price: £31.80

Pipes

Product Code: 069108023SW

RRP: £51.23
Our Price: £26.90

Product Code: 069108022SW

RRP: £62.60
Our Price: £32.87

Product Code: 069108025FK

A 260mm fixed straight length
RRP: £20.50
Our Price: £10.76

Product Code: 069108024FK

A 425mm fixed straight length
RRP: £27.88
Our Price: £14.00

Product Code: 069108020FK

A 925mm fixed straight length
RRP: £50.72
Our Price: £23.00

Product Code: 059008070FK

Used to connect the FK pieces together at the joints
RRP: £9.12
Our Price: £4.79

Product Code: 059008001SW

Seals should be used in condensing applications. please purchase one seal with each item of flue pipe.
RRP: £9.12
Our Price: £3.99

Elbows/tees

Product Code: 069108044FK

15 degree elbow, designed to allow a 15 degree change in direction from the vertical
RRP: £25.61
Our Price: £13.45

Product Code: 069108042FK

30 degree elbow, designed to allow a 30 degree change in direction from the vertical
RRP: £25.61
Our Price: £13.45

Product Code: 069108040FK

45 degree elbow, designed to allow a 45 degree change in direction from the vertical
RRP: £23.22
Our Price: £12.19

Product Code: 069108043FK

87 degree elbow, designed to allow a 87 degree change in direction
RRP: £48.83
Our Price: £25.64

Product Code: 069108433FK

90 degree elbow, designed to allow a right angled change in direction from the vertical
RRP: £48.83
Our Price: £25.64

Product Code: 080523FK

RRP: £96.05
Our Price: £50.43

Product Code: 059008703FK

Chimney section with a T shape to allow connection to the soot collector or connection between horizontal and vertical runs - outlet of middle branch has a smaller diameter
RRP: £89.81
Our Price: £47.15

Product Code: 069108060FK

Used to close or provide cleaning access at the base of the flue off a tee
RRP: £20.18
Our Price: £10.59

Product Code: 069108061FK

Used to close or provide a drain point for drainage at the base of the flue off a tee
RRP: £22.74
Our Price: £11.94

Product Code: 0691080613FK

Used to close or provide a drain point for drainage at the base of the flue off a tee
RRP: £22.74
Our Price: £11.94

Product Code: 069108031FK

Chimney section with a T shape to allow connection to the soot collector or connection between horizontal and vertical runs - 2 locking bands are required
RRP: £59.89
Our Price: £31.44

Product Code: 06910831AFK

Chimney section with a T shape to allow connection to the soot collector or connection between horizontal and vertical runs - 2 locking bands are required
RRP: £59.89
Our Price: £31.44

Supports

Product Code: 080856FK

The Joist Support bracket is used as a support on the top side of combustible floors where the chimney passes through. Use in conjunction with a firestop on the underside of the floor
RRP: £383.25
Our Price: £201.21

Product Code: 069008831FK

Adj Wall Support Used to connect to elements at the joints using its integrated locking band and also fixing the chimney to the wall.
A wall support has to be installed every 2 or 3 metres. This suppoort withstands both the lateral and vertical (weight) of the flue. By using this piece you will not need to use a locking band.
RRP: £30.59
Our Price: £16.06

Product Code: 08065FK

RRP: £197.21
Our Price: £103.54

Product Code: 069008846FK

Used to fix the chimney to the wall. It can be placed anywhere along the flue, except at the joints. This wall support allows regulation between the chimney and the wall from 250mm to 430mm.
This wall support can be cut using a grinder or a metal saw, The flat wall supports withstands only lateral and horizontal forces and does NOT support the weight of the flue. You still need to purchase a locking band to connect 2 elements together.
RRP: £110.78
Our Price: £58.16

Product Code: 069008836FK

Used to fix the chimney to the wall. It can be placed anywhere along the flue, except at the joints. This wall support allows regulation between the chimney and the wall from 100mm to 250mm.
This wall support can be cut using a grinder or a metal saw, The flat wall supports withstands only lateral and horizontal forces and does NOT support the weight of the flue. You still need to purchase a locking band to connect 2 elements together
RRP: £96.84
Our Price: £50.84

Product Code: 069008086FK

Used to fix the chimney to the wall.
It can be placed anywhere along the flue, except at the joints. The flat wall supports withstands only lateral and horizontal forces and does NOT support the weight of the flue. You still need to purchase a locking band to connect 2 elements together.
RRP: £27.70
Our Price: £14.54

Product Code: 080110FK

Special locking band to fix guy wires (not supplied) in case the flue has a length of more than 2m without the possibility of fixing to the wall
RRP: £25.95
Our Price: £13.62

Product Code: 08082FK

Designed to fix the chimney to the ceiling. It can be adapted depending on the ceiling inclination
RRP: £42.60
Our Price: £22.37

Product Code: 059008821FK

Split ring support bracket
RRP: £43.31
Our Price: £22.74

Terminals

Product Code: 08064FK

Stainless steel plate designed to provide appropriate distance between the flue and the adjacent materials, according to both fire and building regulations
RRP: £68.36
Our Price: £35.89

Product Code: 08015FK

RRP: £70.82
Our Price: £37.18

Product Code: 069108011FK

Final element of the vertical run that not only protects the chimney from the rain, but, is designed to prevent the wind from affecting the draught of the chimney - requires a locking band
RRP: £26.90
Our Price: £14.12

Product Code: 069108010FK

Final element of the vertical run that protects the chimney from the rain - requires a locking band
RRP: £71.53
Our Price: £34.00

Product Code: 069108012FK

A terminal the protects the insulation of the chimney and provides an unrestricted discharge to the atmosphere - requires a locking band
RRP: £126.98
Our Price: £68.00

Flashings

Product Code: 03900A171SW

Flashings are used in conjunction with a storm collar to provide weatherproof seal as the chimney passes through the roof. This is suitable for pitches from 30 to 45 degrees.
RRP: £141.51
Our Price: £74.29

Product Code: 03900A181SW

Flashings are used in conjunction with a storm collar to provide weatherproof seal as the chimney passes through the roof. This is suitable for pitches from 5 to 30 degrees.
RRP: £141.51
Our Price: £74.29

Product Code: 03900A191SW

Flashings are used in conjunction with a storm collar to provide weatherproof seal as the chimney passes through the roof. This is suitable for a flat roof
RRP: £153.05
Our Price: £80.35

Product Code: 069008013FK

Used to ensure water tightness in the passage through the roof. It also protects the rubberised flashing from extreme weather conditions
RRP: £20.64
Our Price: £10.84

Accessories

Product Code: 08050FK

Section used to carry out flue gas analysis
RRP: £35.07
Our Price: £18.41

Product Code: 08014FK

Used to protect the chimney in the passage through a wall
RRP: £28.82
Our Price: £15.13
© 2017 Flue Liner Direct - Google+