125mm (5")

Flexible Gas Liners

Product Code: 4Z-125-

Suitable for use on appliances fired by gas ( as specified by the fire manufacturer ), and oils up to 28 second.
RRP: £34.98
Our Price: £9.62

Product Code: 34-125-CT

RRP: £90.60
Our Price: £36.24

Product Code: 34-125-P

A two piece aluminium plate used to support the liner at the top of the stack.
RRP: £6.55
Our Price: £2.62

Product Code: 34-125-D

Register Plate made from 1.5mm thick galvanised steel, it can be sprayed to match the colour of your stove pipe. Comes 4 angle supports. Can be cut down on site.
RRP: £23.86
Our Price: £9.54

Product Code: 34-125-DP

RRP: £42.54
Our Price: £17.01

Product Code: 34-125-FB

A pot hanger cowl suitable for gas liner. This should be used in conjunction with a chimney pot. The liner should be connected to the inner tube then the flue bug should be attached to the chimney pot with the supplied strap.
RRP: £45.27
Our Price: £18.11

Product Code: 20-125-MA

Connects the flexible liner to a rigid single wall pipe near to the base of the stack. The liner fits tightly into the adaptor and is secured with stainless steel screws and fire cement or high temperature sealant (not supplied).
RRP: £36.99
Our Price: £15.99

Product Code: 34-125-C

Gas terminal (GC1). This type of cowl must be used to terminate a liner installed on gas fired appliances. Installation - Place the terminal over the protruding liner, you can screw a stainless steel screw through the cowl and flue liner to secure. Now apply a suitable acid resistant cement as a seal and weather proof render over the clamp plate and up to the bottom holes of the cowl.
RRP: £10.72
Our Price: £6.99

Product Code: 34-125-J

RRP: £18.95
Our Price: £7.58

Product Code: 34-125-N

The nose cone is attached to the leading end of the liner, it helps prevent snagging against the side of the stack during installation. Please note that draw cords are not supplied.
RRP: £3.65
Our Price: £1.83

Product Code: 4A-125-

PACK A - comes with a cut length of gas liner and clamp plate. Suitable for use on appliances fired by gas ( as specified by the fire manufacturer ), and oils up to 28 second
RRP: £209.94
Our Price: £62.98

Product Code: 4B-125-

PACK B - comes with a cut length of gas liner, a GC1 cowl and clamp plate. Suitable for use on appliances fired by gas ( as specified by the fire manufacturer ), and oils up to 28 second.
RRP: £221.16
Our Price: £66.35

Product Code: 4C-125-

PACK C - comes with a cut length of gas liner, a GC1 cowl, nose cone and clamp plate. Suitable for use on appliances fired by gas ( as specified by the fire manufacturer ), and oils up to 28 second.
RRP: £226.15
Our Price: £67.84

Product Code: 13-REG-H

<p> <span style="font-family: arial, helvetica, clean, sans-serif; font-size: 11px; line-height: 13.5409994125366px; text-align: justify;">Register Plate made from 1.5mm thick galvanised steel, it can be sprayed to match the colour of your stove pipe. Comes 4 angle supports. Can be cut down on site</span></p>
RRP: £29.12
Our Price: £25.00
© 2017 Flue Liner Direct - Google+