300mm (12")

Liner Packs

Product Code: 35Z-300-1

Multi-fuel flexible liner made from 316L grade stainless steel. Suitable for use in an existing chimney void with gas, oil, coal, coke, cured dry logs, cured dry peat. THIS PRODUCT HAS A TEN YEAR WARRANTY AND IS HETAS APPROVED (EN1856-2 T450 N1 D V3 L50012 G)
<p> Multi fuel flexible flue liner 316 grade 300mm / 12 inch diameter</p>
RRP: £212.42
Our Price: £55.04

Product Code: 36Z-300-1

Multi fuel flexible liner made from 904L grade stainless steel on both the inner and outer walls, both the smooth inner liner and convoluted outer skin being 0.12mm thick. - 25 year manufacturers warranty with this product HETAS APPROVED (EN1856-2 T450 N1 D V3 L70012 G)
RRP: £369.72
Our Price: £62.00

Bottom Fixings

Product Code: 20-300-GHL

Gathers are used on open fires and baskets. The formed stainless steel gather is connected to the multi fuel liner in the chimney. The gather helps the flow of gases up the chimney, it also prevents the liner coming into contact with a fierce heat that can be produced.
RRP: £218.40
Our Price: £129.00

Top Fixings - If you do not have a chimney pot

Product Code: 20-300-RC

Provides rain protection at the top of the stack.
RRP: £122.36
Our Price: £52.00

Product Code: 20-300-C

Used in conjunction with the Top Plate and Top Insert Sleeve, this will support the weight of the liner at the top of the stack.
RRP: £42.90
Our Price: £17.59

Product Code: 20-300-P

The plate measure 15 inch square (375mm) and is used in conjunction with the Top Clamp and Top Insert Sleeve, this will support the weight of the liner at the top of the stack.
RRP: £37.06
Our Price: £17.60

Accessories

Product Code: 20-300-J

Enables the joining of two pieces of multi fuel liner (only to be used in none flueing applications)
RRP: £105.97
Our Price: £42.39

Product Code: 20-300-NC

Nose cones can be attached to the leading end of the liner and helps prevent snagging against the side of the stack during installation. Please note that draw cords are not supplied.
RRP: £54.69
Our Price: £24.61

Product Code: 13-REG-H

Register Plate made from 1.5mm thick galvanised steel, it can be sprayed to match the colour of your stove pipe. Comes 4 angle supports. Can be cut down on site
RRP: £32.00
Our Price: £25.00
© 2017 Flue Liner Direct - Google+