150mm (6")

6 inch flue liner.  Also available in all other sizes, in stock.

Our HETAS approved Multi-fuel flexible liner is manufactured to the highest standards in flexible twin skinned stainless steel flue lining with a smooth inner wall (BS EN 1856-4-2006).  It is a class 1 liner that is suitable for multi-fuel use e.g. wood, gas, coal, oil.  Flexible liners are installed into a masonry chimney to produce a continuous and unbroken flue from appliance to outlet. This prevents flue gasses escaping though disintegrating brickwork and provides the optimum flue diameter for the appliance and thereby maximizes heat output from the appliance.

We manufacture two grades of liner, double skin 316 grade or double skin 904 grade austenitic stainless steel:-

316 grade is a multi-fuel liner for wood burning and solid fuel use - 10 year Warranty (Des No. EN1856-2-T450-N1-D-V3-L50020-G)

904 grade is a premium grade multi-fuel liner for wood burning, solid fuel use and smokeless fuels - 25 yr Warranty (Des No. EN1856-2-T450-N1-D-V3-L70020-G)

Liner Packs

Product Code: 35Z-155-1

Multi-fuel flexible liner made from 316L grade stainless steel. Suitable for use in an existing chimney void with gas, oil, coal, coke, cured dry logs, cured dry peat. THIS PRODUCT HAS A TEN YEAR WARRANTY AND IS HETAS APPROVED (EN1856-2 T450 N1 D V3 L50012 G)
RRP: £76.61
Our Price: £12.99

Product Code: 36Z-155-1

Multi fuel flexible liner made from 904L grade stainless steel on both the inner and outer walls, both the smooth inner liner and convoluted outer skin being 0.12mm thick. - 25 year manufacturers warranty with this product HETAS APPROVED (EN1856-2 T450 N1 D V3 L70012 G)
RRP: £187.96
Our Price: £24.95

Bottom Fixings

Product Code: 20-150-MAE

A metal connector which connects the flexible chimney liner to single wall pipe at the base of the stack.
RRP: £46.01
Our Price: £15.99

Product Code: 20-150-MRD

A metal connector which connects the flexible chimney liner one diameter size bigger to single wall pipe at the base of the stack.
RRP: £214.46
Our Price: £75.06

Product Code: 20-150-GHS

Gathers are used on open fires and baskets. The formed stainless steel gather is connected to the multi fuel liner in the chimney. The gather helps the flow of gases up the chimney, it also prevents the liner coming into contact with a fierce heat that can be produced.
RRP: £143.32
Our Price: £57.33

Product Code: 20-125-MR

A metal connector which connects the flexible chimney liner one diameter size bigger to single wall pipe at the base of the stack.
RRP: £76.62
Our Price: £24.90

Top Fixings - If you have a chimney pot

Product Code: 20-150-SPHCM

The Pot Hanger with integral rain cap and bird guard not only allows the chimney liner to be installed without removing the pot, but prevents any bird penetration and increased rain protection. It is used at the top of the chimney pot to take the weight of the liner, simply push the liner between the three straps and tighten the supplied jubilee band. The pot hanger also has a further three straps which hang down the outside of the chimney pot.
RRP: £255.00
Our Price: £80.00

Product Code: 20-150-SPHCMT

The Pot Hanger with integral rain cap and bird guard not only allows the chimney liner to be installed without removing the pot, but prevents any bird penetration and increased rain protection. It is used at the top of the chimney pot to take the weight of the liner, simply push the liner between the three straps and tighten the supplied jubilee band. The pot hanger also has a further three straps which hang down the outside of the chimney pot.
RRP: £275.00
Our Price: £92.00

Product Code: 20-150-PHAD

The Pot Hanger allows the chimney liner to be installed without removing the pot. It is used at the top of the chimney pot to take the weight of the liner, simply push the liner between the three straps and tighten the supplied jubilee band. The pot hanger also has a further three straps which hang down the outside of the chimney pot. The jubilee band supplied is fixed around these to secure against the pot. The standard pot hanger can be useful where a downdraught is suspected as it can be used to hang the liner from the top of the pot and then an anti-downdraught cowl can be fitted.
RRP: £213.06
Our Price: £101.21

Product Code: 20-150-PHADT

The Pot Hanger with integral anti-downdraught cowl is the ultimate in chimney liner suspending cowls. Not only allowing the chimney liner to be installed without removing the pot, but prevents any downdraught and increased rain protection. It is used at the top of the chimney pot to take the weight of the liner, simply push the liner between the three straps and tighten the supplied jubilee band. The pot hanger also has a further three straps which hang down the outside of the chimney pot. The jubilee band supplied is fixed around these to secure against the pot.
RRP: £239.86
Our Price: £113.93

Product Code: 20-150-PHCM

The Pot Hanger with integral rain cap and bird guard not only allows the chimney liner to be installed without removing the pot, but prevents any bird penetration and increased rain protection.
<p> It is used at the top of the chimney pot to take the weight of the liner, simply push the liner between the three straps and tighten the supplied jubilee band. The pot hanger also has a further three straps which hang down the outside of the chimney pot. The jubilee band supplied is fixed around these to secure against the pot.</p>
RRP: £144.06
Our Price: £48.99

Product Code: 20-150-PHS

The Pot Hanger allows the chimney liner to be installed without removing the pot. It is used at the top of the chimney pot to take the weight of the liner, simply push the liner between the three straps and tighten the supplied jubilee band. The pot hanger also has a further three straps which hang down the outside of the chimney pot. The jubilee band supplied is fixed around these to secure against the pot. The standard pot hanger can be useful where a downdraught is suspected as it can be used to hang the liner from the top of the pot and then an anti-downdraught cowl can be fitted.
RRP: £90.07
Our Price: £31.53

Product Code: 20-150-PHB

RRP: £23.95
Our Price: £9.58

Product Code: 20-150-PHCMT

The Pot Hanger with integral rain cap and bird guard not only allows the chimney liner to be installed without removing the pot, but prevents any bird penetration and increased rain protection.
<p> It is used at the top of the chimney pot to take the weight of the liner, simply push the liner between the three straps and tighten the supplied jubilee band. The pot hanger also has a further three straps which hang down the outside of the chimney pot. The jubilee band supplied is fixed around these to secure against the pot.</p>
RRP: £147.00
Our Price: £51.99

Top Fixings - If you do not have a chimney pot

Product Code: 20-150-PSRC

Provides rain protection at the top of the stack.
RRP: £47.27
Our Price: £22.45

Product Code: 20-150-PS

The top insert sleeve slides inside the flexible chimney liner at the top of the installation and is used together in conjunction with the Top Plate and Top Clamp, this will support the weight of the liner at the top of the stack.
RRP: £22.93
Our Price: £10.32

Product Code: 20-150-RC

Provides rain protection at the top of the stack.
RRP: £47.22
Our Price: £20.07

Product Code: 20-150-C

Used in conjunction with the Top Plate and Top Insert Sleeve, this will support the weight of the liner at the top of the stack.
RRP: £22.93
Our Price: £9.40

Product Code: 20-150-P

The plate measure 15 inch square (375mm) and is used in conjunction with the Top Clamp and Top Insert Sleeve, this will support the weight of the liner at the top of the stack.
RRP: £21.16
Our Price: £10.05

Accessories

Product Code: 20-150-J

Enables the joining of two pieces of multi fuel liner (only to be used in none flueing applications)
RRP: £56.19
Our Price: £22.48

Product Code: 20-150-NC

Nose cones can be attached to the leading end of the liner and helps prevent snagging against the side of the stack during installation. Please note that draw cords are not supplied.
RRP: £8.70
Our Price: £3.92

Product Code: 94-REG-F

<p> <span style="font-family: arial, helvetica, clean, sans-serif; font-size: 11px; line-height: 13.5409994125366px; text-align: justify;">Register Plate made from 1.5mm thick galvanised steel, it can be sprayed to match the colour of your stove pipe. Comes 4 angle supports. Can be cut down on site</span></p>
RRP: £34.99
Our Price: £28.00

Product Code: 13-REG-F

<p> <span style="font-family: arial, helvetica, clean, sans-serif; font-size: 11px; line-height: 13.5409994125366px; text-align: justify;">Register Plate made from 1.5mm thick galvanised steel, it can be sprayed to match the colour of your stove pipe. Comes 4 angle supports. Can be cut down on site</span></p>
RRP: £34.99
Our Price: £28.00

Product Code: 13-REG-G

Register Plate made from 1.5mm thick galvanised steel, it can be sprayed to match the colour of your stove pipe. Comes 4 angle supports. Can be cut down on site
RRP: £35.26
Our Price: £33.00

Product Code: 13-REG-H

Register Plate made from 1.5mm thick galvanised steel, it can be sprayed to match the colour of your stove pipe. Comes 4 angle supports. Can be cut down on site
RRP: £32.00
Our Price: £25.00

Installation Pack - If you have a chimney pot

Product Code: 20-150-P603

Installation Pack No. 3, contains all items required to go with 150mm diameter multifuel flex - The box contains a stainless steel pot hanging cowl with mesh, nose cone, adapter from 150mm vitreous enamel or stainless steel single wall to 150mm multi-fuel liner and chimney notice plate.
RRP: £199.38
Our Price: £69.78

Product Code: 20-150-P606

Installation Pack No. 6, ALL YOU NEED IN ONE BOX FOR USE WITH multifuel flex - The box contains a stainless steel pot hanging cowl with mesh, nose cone, increasing adapter from 125mm vitreous enamel or stainless steel single wall to 150mm multi-fuel liner and chimney notice plate.
RRP: £201.23
Our Price: £80.49

Product Code: 20-150-P607

Installation Pack No. 7, ALL YOU NEED IN ONE BOX FOR USE WITH 150mm diameter multifuel flex - The box contains a terracota pot hanging cowl with mesh, nose cone, adapter from vitreous enamel or stainless steel single wall to multi-fuel liner and chimney notice plate.
RRP: £208.94
Our Price: £70.99

Product Code: 20-150-P608

Installation Pack No. 8, ALL YOU NEED IN ONE BOX FOR USE WITH multifuel flex - The box contains a terracotta pot hanging cowl with mesh, nose cone, increasing adapter from 125mm vitreous enamel or stainless steel single wall to 150mm multi-fuel liner and chimney notice plate.
RRP: £210.78
Our Price: £81.99

Installation Pack - If you do not have a chimney pot

Product Code: 20-150-P601

Installation Pack No. 1, contains all the items you will require with 150mm diameter multifuel flex - The box contains a top plate, top clamp, top insert, nose cone, adapter from 150mm vitreous enamel or stainless steel single wall to 150mm multi-fuel liner and chimney notice plate.
RRP: £115.11
Our Price: £51.80

Product Code: 20-150-P602

Installation Pack No. 2 includes all items required to go with 150mm diameter multifuel flex - The box contains a top plate, top clamp, top insert, nose cone, adapter from 150mm vitreous enamel or stainless steel single wall to 150mm multi-fuel liner, rain cap and chimney notice plate.
RRP: £155.63
Our Price: £66.14

Product Code: 20-150-P604

Installation Pack No. 4 contains all items required to go with 150mm diameter multifuel flex - The box contains a top plate, top clamp, top insert, nose cone, increasing adapter from 125mm vitreous enamel or stainless steel single wall to 150mm multi-fuel liner and chimney notice plate.
RRP: £113.13
Our Price: £62.22

Product Code: 20-150-P605

Installation Pack No. 5, to go with 150mm diameter multifuel flex - The box contains a top plate, top clamp, top insert, nose cone, increasing adapter from 125mm vitreous enamel or stainless steel single wall to 150mm multi-fuel liner, rain cap and chimney notice plate.
RRP: £153.65
Our Price: £76.82
© 2017 Flue Liner Direct - Google+