30 Deg Elbow - 125mm

30 Deg Elbow - 125mm

SKU: 1-125-30
Fixed elbow. SW316-1mm Single Wall is suitable for use on appliacations fired by gas, oil and solid fuel with flue fas temperatures not exceeding 540oC, up to 750oC short firing.

Availability: In stock

£22.11
Product Description

    Details

    Single Wall 1mm think stainless steel flue pipe is used to connect an appliance to either a chimney liner, stack or twin wall flue system. It can also be used to reline existing masonry chimneys. It is recommended that a verticle rise of 600mm should be allowed, immediately above the appliance before any change in direction. If bends are needed, then no part of a flue pipe should form an angle greater than 45° from the verticle, except where it may be necessary to use a very short horizontal section, not exceeding 150mm of flue to connect the flue pipe to a back outlet appliance. A maximum of 4 bends ( 2 offsets ) is permitted. Distances from combustible materials must be three times the diameter of the flue pipe. E.g. 150mm dm = 450mm clearance.
Additional Information

    Additional Information

    SKU 1-125-30
    Diameter 125mm (5")
    Components Elbows/Tees
CMS tab

Please wait...

Continue shopping
View cart & checkout
Continue shopping
View cart & checkout